TIPS AND TECHNIQUES FOR ENDURABLE SEALER
|
- ENDURABLE SEALER IS AN AMAZING PRODUCT. Using this product on textured concrete such as broom-finished concrete or stamped concrete is very easy. We recommend that you apply the product by sprayer with conical tip size of .05 - .15 gpm at 40 psi for the first coat. The second coat may be applied via sprayer and then followed with a T-Bar microfiber applicator or 3/16" roller to help even out the product. Do not over-apply the product. Once you see that the surface is turning milky white you have enough product and you do not want to apply any more product. It is very easy and you will love the results.
- Applying this product on smooth profiled surfaces requires a little more technique to apply evenly and avoid streaking. You should still apply the first coat with spray with a tip size of .05 - .15 gpm at 40 psi. Make sure that the surface appears wet but do not over-apply. When the surface starts turning milky white, you know that there is enough product and you need to be careful to not over apply the product. The second coat is easiest to apply with a sprayer and then follow behind with a micro-fiber or roller. Again, do not over-apply and watch for the milky white look to know when you have enough product applied. One option to help with an even application on a smooth profiled floor is to apply the product and use a low-speed buffer while the material is still wet. We highly recommend applying GG Finish Wax on interior smooth surface concrete after the sealer is completely dry. This will help with an added layer of protection, increase slip-resistance, and it will also help even out any streaking if you weren't able to apply the sealer perfectly.
|
|